Skip to content
🌻 SPRING INTO SAVINGS- Take 5% Off ANY ITEM (code 24SPRING5)- LIMITED TIME ONLY
🌻 SPRING INTO SAVINGS- Take 5% Off ANY ITEM (code 24SPRING5)- LIMITED TIME ONLY

Rinnai RE180i High Efficiency Non-Condensing 8.5 GPM Tankless Hot Water Heater

 
 
Save 27%
Original Price $ 1,899.00
Current Price $ 1,389.00
 

Notify me when back in stock

   

The Rinnai RE180i High Efficiency Non-Condensing 8.5 GPM Tankless Hot Water Heater is a non-condensing line of tankless hot water heaters.

The RE180i is for residential use and is available in either Natural Gas or Liquid Propane. 

This item, the RE180i, is for indoor installation and, therefore, requires venting.  

It features 180,000 BTUs and hot water delivery with a flow rate that ranges from 0.13 - 8.5 GPM.  The minimum GPMs is ideal for low demand uses such as shaving, where warm water is needed but not at a high rate!  It is the ideal tankless solution for a home with two bathrooms.

The RE180i is optimal for simultaneous use of 3 - 4 fixtures at one time.  So 2 people can shower and get ready to go out, while someone else is washing the dishes, and not fear running out of hot water.  Simultaneous fixture use is directly linked to the ground water temperature. Please refer to the chart:

An integrated controller is included on the water heater.  The minimum temperature setting is 98° with a maximum of 140°F.  The unit provides maximum settings at 125°F with an option to increase to 140°F.

In a non-condensing tankless water heater, such as the RE180i, once you turn on the tap, cold water goes into tankless heater and the flame is activated.  Water is heated as it passes through the coils in the copper heat exchanger, exits the water heater, into your pipes and up to the fixture calling for the hot water.  Depending on the amount of hot water called for, the flame adjusts accordingly to heat more or less water.

Outdoor installation does not require venting.  This item, the RE180i, is for indoor installation and therefore requires venting.


Benefits of a Tankless Hot Water Heater:
  • Endless hot water - Heats water as it goes through the pipes, offering endless hot water for your home (or business)
  • Hot water on demand - Once you turn the water on, hot water runs through your pipes and out the faucet! Virtually no time or water is wasted waiting for the water to heat up
  • Highly Efficient - Gallon for gallon, you will spend less money heating your hot water. With a tankless system the water is heated on demand rather than sitting in a storage tank. A storage tank typically heats the water intermittently throughout the day and night not only when it is needed. This unit features an Energy Factor of 0.82 (the closer to 1.0 the better)
  • Ultra Low NOx - Complies with South Coast Air Quality Management District 14 ng/J or 20 ppm NOx Emission Levels
  • Long lasting - Unlike a storage tank in which the water sits in the tank all the time creating sediment and rust, a tankless water heater will last longer
  • EZ Connect - Allows for connection of two units together

      Product Specifications:

      General Features

      • Installation Type:  Indoor
      • Product Use:  Residential Only
      • Fuel Type: RE180IN (Natural Gas), RE180IP (Liquid Propane)
      • Energy Star:  No
      • Condensing:  No
      • Built-In Re-Circulation Pump:  No
      • Connectivity:  Yes, Module Available (Optional)
      • Mobile Home Certified:  Yes

      Performance

      • Gallons Per Minute (GPM):  0.13 - 8.5
      • Uniform Energy Factor (UEF):  0.82
      • Temperature Setting Range:  98°F - 140°F
      • Minimum Gas Consumption (BTUs):  10400
      • Maximum Gas Consumption (BTUs):  180000

      Features

      • Thermal Bypass Valve:  No
      • Isolation Valve:  Optional (sold separately)

      Venting and Connection Requirements

      • Venting:  3"/5" Concentric
      • Water Connection Size:  3/4" NPT

      Weights and Dimensions

      • Overall Depth (in.):  10.77
      • Overall Height (in.):  22.87
      • Overall Width (in.):  14.05
      • Weight (lbs.):  38.5

      Electrical Requirements

      • Voltage:  110-120V
      • Amps:  4
      • Circuit Breaker Amps:  10

       


      Buy On Amazon Buy On Amazon

      Customer Reviews

      Be the first to write a review
      0%
      (0)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      >